Xerox DocuPrint N24 Service Manual page 152

Figure 4.2.11b. Tray 1 Retard Assembly.
Replacement
1 Reinstall the Feeder Assembly into position. Ensure the Feed Shaft bearing is in the support
bracket.
2 Reinstall the Tray 1 Retard Clutch, Spacer and Roll.
3 Reinstall the Tray 1 - One Way Clutch.
4 Reinstall Tray 1 Gear Assembly and secure with the E-ring.
5 Reinstall the Tray 1 Feed Clutch.
6 Reinstall the Upper Rear Cover.
7 Reinstall the Lift Up Sensor.
8 Reinstall Tray 1.
9 Close the Upper Left Cover.
10 Replace Duplex Unit, if removed.
11 Verify proper operation.
2/2000
Repair Procedures 4-38 DocuPrint N24, N32, N40, N3225 and N4025