Xerox DocuPrint N24 Service Manual page 947

A motor lowers the End Wall and the Compiler Bin Solenoid tilts the Bin, causing the paper set to move
into the Stapler.
Compiler /Tamper Paper Path Components
1 Eject Roll
Dives paper into the Compiler Bin.
2 Compiler Bin
Staging area used to collect sheets of paper into sets for stapling.
3 End Wall
Closes the end of the Compiler Bin so paper can be collected into sets. Is moved out of the way
when the set is ready to be sent to the Stapler.
4 End Wall Motor
Moves the End Wall into position or out of the way.
5 Tamper
Taps the sides of the paper set to square up the edges before stapling.
6 Compiler Bin Solenoid
Tilts the Compiler Bin so the paper set slides into the Stapler.
DocuPrint N24, N32 and N40 Service Manual
3/99
8-509 Options