Xerox DocuPrint N24 Service Manual page 161

Replacement
1 Position the Nudger Roll so the forked end faces away from the No-Paper Sensor.
2 Slide the Nudger Roll onto the Nudger Shaft, making sure the forked end engages the pin at the
end of the shaft.
3 Use an E-ring to secure the Nudger Roll to the Shaft.
4 Slide the MBF Gate onto the Shaft (see the illustration for correct positioning of the Gate) (Figure
4.3.4b).
5 Use an E-clip to secure the Gate to the Shaft.
6 Reinstall and secure the No-Paper Sensor Bracket onto the Feeder Assembly.
7 Reinstall the MBF Top Cover.
8 Reinstall the MBF Assembly.
9 Reinstall the Duplex Module.
10 Verify proper operation.
DocuPrint N24, N32, N40, N3225, and N4025
Figure 4.3.4b. Nudger Roll Removal.
2/2000
4-47 Repair Procedures