Rap 8.5.7.5 Error Code "Close Cover E - Xerox DocuPrint N24 Service Manual

RAP 8.5.7.5 Error Code "Close Cover E"

1 Reposition the Transport to make a better connection with the Docking Assembly. The error code
reappears.
Y N
|
Problem solved.
2 Pull the Finisher away from the Docking Assembly. Inspect the IN Gate Actuator. The Actuator is
in good condition and not broken.
Y N
|
Replace the IN Gate Actuator (REP 8.5.3.86).
3 Enter Diagnostic Mode - Input H/L - Gate In Interlock Sw. Actuate and deactuate the IN Gate
Interlock Switch. The Control Panel LCD displays H when the Switch is actuated and L when the
Switch is deactuated.
Y N
|
Replace the IN Gate Interlock Switch (REP 8.5.3.87).
4 Replace the Finisher PWB (REP 8.5.3.83). The error code reappears.
Y N
|
Problem solved.
5 Replace the Printer Engine Controller PWB (REP 4.10.6).
Options
3/99
8-542 DocuPrint N24, N32 and N40 Service Manual