Xerox DocuPrint N24 Service Manual page 399

1 Compare the solid areas on the System Controller Test Prints with the Output Reference
document 82P520 (Figure 7.33a). There are no solid areas on any print lighter than the 1.20
density square on the scale, and there are no two solid areas on any print that differ in density of
more than one density square.
Y N
|
Go to step 3.
2 The Solid Area Density is within specifications. Go to the checkout on the next page.
3 The solid area density is uniform.
Y N
|
Replace in the following order: EP Cartridge (PL 7.2), HVPS (REP 4.10.4).
4 The prints are too faint.
Y N
|
Go to step 6.
5 Go to RAP 7.34.
6 The prints are black.
Y N
|
Replace in the following order: EP Cartridge (PL 7.2), HVPS (REP 4.10.4).
7 Go to RAP 7.35.
DocuPrint N24, N32, N40, N3225, and N4025
Figure 7.33a. Output Reference Document
1.50
1.40
1.30
1.20
1.10
1.0
.90
.80
82P520 (S.I.R. 495.01)
OUTPUT REFERENCE
.70
2/2000
7-45 Repair Analysis Procedures (RAP)