Xerox DocuPrint N24 Service Manual page 167

7 Unhook the Link Spring from the Rear Latch (Figure 4.3.7c).
8 Remove the E-ring securing the MBF Link Gear to the idler shaft, and slide the Gear, along with
the MBF Drive Gear Assembly off of the shaft.
9 To allow clearance, loosen the screw located under the notch in the clutch (Figure 4.3.7d)
10 Remove the E-ring securing the MBF Feed Clutch to the Feed Shaft and slide the Clutch off of
the Feed Shaft (Figure 4.3.7d).
DocuPrint N24, N32, N40, N3225, and N4025
Figure 4.3.7c. MBF Link Gear.
Figure 4.3.7d. MBF Feed Clutch.
2/2000
4-53 Repair Procedures