Xerox DocuPrint N24 Service Manual page 186

Replacement
1 Open the Duplex Unit.
2 Open the Upper Left Cover.
3 Reinstall the Offset / Exit Assembly onto the printer frame.
4 Use three screws (one screw at the front, next to the solenoid, and two screws at the rear) to
secure the Offset / Exit Assembly to the printer frame.
5 Reconnect the four P/Js to the Offset / Exit Assembly.
6 Reinstall the Rear Cover Assembly.
7 Reinstall the Fuser Full Cover.
8 Verify proper operation.
2/2000
Repair Procedures 4-72 DocuPrint N24, N32, N40, N3225 and N4025