Internal Hold Tone - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

Internal Hold Tone

Software Version: CPC-AII and CPC-B, Version 7.0 or higher
Address: FF1 2# 1# 39# (0 or 1)#
Description
Use this address to enable or disable Internal Hold Tone, which is a double-
beep heard every 7 seconds by a caller on hold.
Programming
Notes
MOH Override. Internal Hold Tone (if enabled) will override any MOH
(Music-On-Hold) sound source installed.
DBS-2.3/9.2-400
FF1 2# 1# 39# (0 or 1)#
DBS Manual - Revised April 2000
Chapter 1. System Programming (FF1)
0=Disabled (no Internal Hold Tone)
1=Enabled (Internal Hold Tone heard)
Page 1-51