Dial Tone Receive - Panasonic DBS-2.3-400 Programming Manual

Chapter 1. System Programming (FF1)

Dial Tone Receive

Software Version: CPC-B Version 4.0 or higher
Address: FF1 8# 4# 6# (Trunk)# 10# (0 or 1)#
Description
Determines whether dial tone is transmitted from the DBS T1 channel to DBS
stations.
Set this address to "On" only if the far end does not provide T1 dial tone.
Programming
Notes
Ordering Tones From Carrier. If a carrier is supplying T1 services, always
order Dial Tone and Ringback Tones from the carrier.
Page 1-198
FF1 8# 4# 6# (1-64)# 10# (0 or 1)#
Trunk Number (1-64)
DBS Manual - Revised April 2000
Section 400-Programming
0=Off
1=On
DBS-2.3/9.2-400