Table of Contents
Advertisement
mi Voice Mail Service
Setting the Voice Mail Tone
If your voice mail service sends a voice mail tone after a new message has
finished recording, set to "On". The
button will flash if a
message was recorded in your mailbox. You will hear a series of voice mail
tones then a dial tone after lifting the handset or pressing
(SP-PHONE/HEADSET). (Contact your service provider about your service.)
Set to "Off" when:
i
— you do not subscribe to a voice mail service,
— your voice mail service does not send a voice mail tone, or
— the unit is connected to a PBX.
+ Your phone comes from the factory set to "On".
38
Be sure that the handset is on the cradle, the AC adaptor is
connected and the SP-PHONE/HEADSET indicator light is off.
1
Press
[FUNCTION/EDIT).
>Date
and
time
Area
code
2nd
area
code
-Function
list-
2
Rotate
(JOG DIAL) until "Voice
mail
tone" is selected.
e The arrow points to "Voice
mail
tone".
SET=Save
"off", is displayed.
4
Rotate
[JOG DIAL) until the desired setting is
Voice
mail ytong
displayed.
gore
"
`
SET=Save
e The display will return to the function list.
To return to the stand-by mode, press
EXIT} or wait for 60 seconds.
e You can exit the programming mode any time by pressing (EXIT).
Advertisement
Table of Contents
