Table of Contents
Advertisement
Chapter 4. Ringing and Hunt Groups (FF4)
Hunt Group Transfer Timer
Software Version: CPC-AII (all versions); CPC-B Version 2.0 or higher
Address: FF4 3# (HuntGrp)# 4# (0-32)#
Description
Use this program to set the maximum amount of time that passes before a call
(after being routed through a busy/unanswered hunt group) overflows to an
extension or additional hunt group.
The call will flash on the last extension's LED -- but will not ring -- for this
amount of time (2 seconds by default), giving the hunt group a "last chance"
to pick up the call before it is transferred out of the hunt group.
Programming
Related Programming
Transfer Extension: FF4 3# (HuntGrp)# 3# (ExtNo.)#
Page 4-16
FF4 3# (1-8)# 4# (0-32)#
Hunt Group No.
DBS Manual - Revised April 2000
Section 400-Programming
Transfer Timer
0 = No transfer (call will remain
in same hunt group)
1-32 = Number of seconds
Default: 2 seconds
DBS-2.3/9.2-400
Advertisement
Table of Contents
