Vau Port Assignment - Panasonic DBS-2.3-400 Programming Manual

Chapter 3. Extension Programming (FF3)

VAU Port Assignment

Software Version: CPC-AII (all versions); CPC-B Version 5.0 or higher
Address: FF3 (ExtPort)# 47# (0 or 1)#
Description
This program assigns a digital port as a VAU (Voice Announce Unit). Once a
port is assigned as a VAU, the system treats that port as if the following
changes have been made:
• Offhook Signal (CO) is disabled -- FF3 (ExtPort)# 7# 0#.
• Call Waiting/OHVA is disabled -- FF3 (ExtPort)# 8# 0#.
• Auto Pickup is enabled -- FF3 (ExtPort)# 12# 1#.
• All FF keys for the extension port are cleared -- FF5 (ExtPort)# FFkey#
Programming
Notes
Applicable Call Types. When VAU is enabled for a port, the following call
types will be routed to the first VAU message:
All recalls will be routed to the second VAU message.
VAU Port Assignment in CPC-A Versions. The address for VAU Port
Assignment in CPC-A Version 3.3 or higher is FF3 (ExtPort)# 34# (0 or 1)#.
Page 3-56
CONF.
FF3 (1-144)# 47# (0 or 1)#
VAU Port Number
•Trunk calls
•Transferred trunk calls
•Intercom calls
•Transferred intercom calls.
DBS Manual - Revised April 2000
Section 400-Programming
0=Off
1=On (defines the port as a VAU)
DBS-2.3/9.2-400