Attendant Transfer Recall Timer For Co Calls; Table 1-11. Attendant Transfer Recall Timer Values For Co Calls - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

Attendant Transfer Recall Timer for CO Calls

Software Version: All Versions
Address: FF1 3# 4# (0-12)#
Description
When an Attendant phone transfers a trunk call to an extension or hunt group,
the transferred call will recall to the Attendant if it is not answered. This
timer determines how long a transferred trunk call will go unanswered before
it recalls (20 seconds by default).
Programming

Table 1-11. Attendant Transfer Recall Timer values for CO calls

Related Programming
Attendant Transfer Recall Timer for Intercom Calls: FF1 3# 24# (0-12)#
DBS-2.3/9.2-400
FF1 3# 4# (0-12)#
Attendant Transfer Recall Timer setting for CO calls
Default: 1 (20 seconds) (see table below)
Setting
0 No recall
1 20 seconds
2 40 seconds
3 60 seconds
4 80 seconds
5 100 seconds
6 120 seconds
7 140 seconds
8 160 seconds
9 180 seconds
10 200 seconds
11 220 seconds
12 240 seconds
DBS Manual - Revised April 2000
Chapter 1. System Programming (FF1)
Value
Page 1-97