Co Delayed Night 2 Ring Assignments For Hunt Groups - Panasonic DBS-2.3-400 Programming Manual

Table of Contents

Advertisement

Chapter 4. Ringing and Hunt Groups (FF4)
CO Delayed Night 2 Ring Assignments for Hunt
Groups
Software Version: CPC-AII and CPC-B, Version 7.0 or higher
Address: FF4 9# 2# (HuntGrp)# (Trunk)# (0 or 1)#
Description
This program assigns delayed ringing to hunt groups for unanswered calls on
specific trunks during "Night 2" mode. Delayed ringing is when an
unanswered incoming call starts ringing at another extension after a certain
period of time (the first extension will stop ringing).
Programming
Related Programming
Delayed Ring: FF1 2# 1# 23# (0 or 1)#
CO Delayed Ring Timer: FF1 3# 26# (0-15)#
CO Night 2 Ring Assignments for Hunt Groups: FF4 9# 1# (HuntGrp)#
(Trunk)# (0 or 1)#
Hunt Group Members: FF4 3# (1-8)# (5-12/20)# (10-69 or 100-699)#
Notes
Attendant Interactions. If the Primary Attendant is assigned delayed
ringing, the Attendant Overflow feature will be disabled. Also, if the Delayed
Ring function is enabled and no extensions are assigned or capable of ringing
(DND, unplugged, etc.), the ringing line will automatically ring the
Attendant.
Timing For Delayed Ringing. Delayed ring timing -- the period of time that
passes before the system transfers the unanswered call -- is controlled by the
CO Delayed Ring Timer (FF1 3# 26#).
Page 4-30
FF4 9# 2# (79-86 or 151-158)# (1-64)# (0 or 1)#
Hunt Groups 1 thru 8:
CPC-AII or CPC-B
79 -or- 151 for Hunt Group 1
80 -or- 152 for Hunt Group 2
81 -or- 153 for Hunt Group 3
82 -or- 154 for Hunt Group 4
83 -or- 155 for Hunt Group 5
84 -or- 156 for Hunt Group 6
85 -or- 157 for Hunt Group 7
86 -or- 158 for Hunt Group 8
DBS Manual - Revised April 2000
Section 400-Programming
Trunk No.
0=Trunk does not ring.
1=Trunk rings.
DBS-2.3/9.2-400

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dbs-9.2-400

Table of Contents