Attendant Park Hold Recall Timer; Table 1-15. Attendant Park Hold Recall Timer Values - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

Attendant Park Hold Recall Timer

Software Version: All Versions
Address: FF1 3# 8# (0-12)#
Description
An Attendant phone can use up to 10 call park numbers (00-09) to hold trunk
calls. These park numbers can be assigned to an FF key or accessed by
placing a call on hold, then dialing 7500-7509. Anyone can pick up the call
by dialing 7600-7609.
This address determines how long a parked call will be held before it recalls
(20 seconds by default).
Programming

Table 1-15. Attendant Park Hold Recall Timer values

DBS-2.3/9.2-400
FF1 3# 8# (0-12)#
Attendant Park Hold Recall Timer setting
Default: 1 (20 seconds) (see table below)
Setting
0 No recall
1 20 seconds
2 40 seconds
3 60 seconds
4 80 seconds
5 100 seconds
6 120 seconds
7 140 seconds
8 160 seconds
9 180 seconds
10 200 seconds
11 220 seconds
12 240 seconds
DBS Manual - Revised April 2000
Chapter 1. System Programming (FF1)
Value
Page 1-101