Did/Dnis To A Voice Mailbox - Panasonic DBS-2.3-400 Programming Manual

Chapter 1. System Programming (FF1)

DID/DNIS to a Voice Mailbox

Software Version: CPC-B Version 6.0 or higher
Address: FF1 2# 1# 36# (0, 1 or 2)#
Description
This address determines whether (and how many) final digits of a DID/DNIS
phone number are transmitted to Voice Mail, in cases where the DID/DNIS
trunk is assigned to ring directly to Voice Mail (not to a DBS extension
phone). This address allows DID/DNIS calls to be routed to a Voice Mailbox
system that is not connected to a physical extension.
To implement this feature, assign the DID/DNIS trunks to ring at the Voice
Mail system (using FF4 ring assignment addresses). Once Voice Mail
answers, the DBS sends a DID/DNIS Answer Code that signals the Voice
Mail system to open the appropriate mailbox, plus the final DID/DNIS digits
(if any) specified in this address.
Programming
Related Programming
DID/DNIS Answer Code: FF1 2# 1# 37# (NNNNNN)#
DID/DNIS (enabling trunks for): FF1 8# 4# 6# (Trunk)# 2# (0-2)#
Inbound DID Dial Numbers: FF1 8# 3# (0000-9999)# (100-699)#
DNIS Number Setting: FF1 8# 4# 7# (0000-9999)# (10-69 or 100-699)#
Terminal Type: FF3 (ExtPort)# 2# (Type)#
Ringing Assignments (trunks to extensions): FF4 addresses
Notes
DID/DNIS Digit Transmission. The DID/DNIS digits are sent only to ports
that are assigned as Voice Mail.
Voice Mail Ports and Hunt Groups. The DID/DNIS digits can be sent to a
specific Voice Mail port or a Voice Mail hunt group.
Second Hunt Group. If the DID/DNIS call rings into a hunt group that is
programmed to transfer calls to a second hunt group, the DID/DNIS call will
not be transferred to the second hunt group.
Page 1-46
FF1 2# 1# 36# (0, 1 or 2)#
0=No DID/DNIS digits are transmitted (only the Answer Code).
1=Answer Code, then final 4 DID/DNIS digits are transmitted.
2=Answer Code, then final 3 DID/DNIS digits are transmitted.
DBS Manual - Revised April 2000
Section 400-Programming
DBS-2.3/9.2-400