Chapter 6. Name and Message Assignments (FF6)
System Speed Dial Names
Software Version: All Versions
Address: FF6 2# (SSD)# CONF (Name)#
Description
Names of up to 16 characters can be assigned to System Speed Dial (SSD)
numbers. The names are displayed alphabetically on large-display telephones
to confirm the name of the person being called using an SSD code.
SSD names can also be assigned without entering the programming mode,
using the Attendant Feature option (see Section 700-Feature Operation for
instructions).
Programming
To assign SSD names ...
FF6 2# (00-89 or 000-199)# CONF (NNNNNNNNNNNNNNNN)#
To clear SSD names ...
Related Programming
Override Toll Restriction With SSD Numbers: FF1 2# 1# 4# (SSD)#
SSD Display Restriction: FF1 2# 1# 5# (0 or 1)#
System Speed Dial Numbers: FF10 1# (SSD)# (PhoneNo.)#
Notes
Using a DSS Console With AFP. If the Attendant Feature Package (AFP) is
used (available only with CPC-B Version 2.0 to 4.0), the DSS console must
be initially set as type "11" in the Terminal Type address (FF3 ExtPort# 2#),
to enable the keys to perform programming functions.
Page 6-4
SSD Number:
00-89=CPC-A (all versions); CPC-AII and
CPC-B versions prior to 7.0
000-199=CPC-AII and CPC-B, Version 7.0 or higher
FF6 2# (00-89 or 000-199)# CONF ON/OFF
DBS Manual - Revised April 2000
SSD Number
Section 400-Programming
Text Name
(up to 16 characters)
DBS-2.3/9.2-400