Did/Dnis Answer Code - Panasonic DBS-2.3-400 Programming Manual

Chapter 1. System Programming (FF1)

DID/DNIS Answer Code

Software Version: CPC-B Version 6.0 or higher
Address: FF1 2# 1# 37# (Code)#
Description
Use this address to specify a DID/DNIS Answer Code. The Answer Code is
used for routing DID/DNIS calls to a Voice Mailbox system that is not
connected to a physical extension.
To implement this feature, assign DID/DNIS trunks to ring directly to the
Voice Mail system using FF4 ring assignment addresses. Once Voice Mail
answers, the DBS sends the DID/DNIS Answer Code, which signals the
Voice Mail system to open the appropriate mailbox.
Programming
Related Programming
DID/DNIS to a Voice Mailbox: FF1 2# 1# 36# (0, 1 or 2)#
DID/DNIS (enabling trunks for): FF1 8# 4# 6# (Trunk)# 2# (0-2)#
Inbound DID Dial Numbers: FF1 8# 3# (0000-9999)# (100-699)#
DNIS Number Setting: FF1 8# 4# 7# (0000-9999)# (10-69 or 100-699)#
Terminal Type: FF3 (ExtPort)# 2# (Type)#
Ringing Assignments (trunks to extensions): FF4 addresses
Notes
Assigning the DID/DNIS Answer Code When Not In Programming Mode.
The DID/DNIS Answer Code may be entered from an Attendant phone, or
from a key phone where the programming access code has been entered.
Press
up to 6 characters, including 0-9, *, #, or REDIAL (for "pause").
DID/DNIS Digit Transmission. The DID/DNIS digits are sent only to ports
that are assigned as Voice Mail.
Page 1-48
FF1 2# 1# 37# (NNNNNN)#
PROG #95 NNNNNN HOLD
DBS Manual - Revised April 2000
Section 400-Programming
DID/DNIS Answer Code
(up to 6 characters)
Valid Entries: 0-9, *, #, or REDIAL (pause)
-- where
"NNNNNN"
is the Answer Code of
DBS-2.3/9.2-400