Table of Contents
Advertisement
Chapter 1. System Programming (FF1)
Unsupervised Conference Timer
Software Version: All Versions
Address: FF1 3# 11# (0-15)#
Description
This address determines how long a conference call can continue between
two trunks after the DBS extension drops out of the conference (10 minutes
by default). When the timer expires, the DBS will automatically disconnect
the conferenced trunks.
This timer also determines how long outbound trunk calls made through
DISA can last.
Programming
Table 1-18. Unsupervised Conference Timer values
Related Programming
Unsupervised Trunk Conference: FF2 (Trunk)# 16# (0 or 1)#
Unsupervised Conference: FF3 (ExtPort)# 13# (0 or 1)#
Page 1-104
FF1 3# 11# (0-15)#
Unsupervised Conference Timer setting
Default: 2 (10 minutes) (see table below)
Setting
0
Unlimited (DBS will not disconnect the
two conferenced trunks)
1
5 minutes
2
10 minutes
3
15 minutes
4
20 minutes
5
25 minutes
6
30 minutes
7
35 minutes
8
40 minutes
9
45 minutes
10
50 minutes
11
55 minutes
12
60 minutes
13
65 minutes
14
70 minutes
15
75 minutes
DBS Manual - Revised April 2000
Section 400-Programming
Value
DBS-2.3/9.2-400
Advertisement
Table of Contents
