Co Delayed Night 2 Ring Assignments - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

CO Delayed Night 2 Ring Assignments

Software Version: CPC-AII and CPC-B, Version 7.0 or higher
Address: FF4 9# 2# (ExtPort)# (Trunk)# (0 or 1)#
Description
This program assigns delayed ringing to extensions for unanswered calls on
specific trunks during "Night 2" mode. Delayed ringing is when an
unanswered incoming call starts ringing at another extension after a certain
period of time (the first extension will stop ringing).
Programming
NOTE: Use port 73 (for single-cabinet systems)
or port 145 (for double-cabinet systems) to assign ringing
to an external paging or Universal Night Answer (UNA) device.
Related Programming
Delayed Ring: FF1 2# 1# 23# (0 or 1)#
CO Delayed Ring Timer: FF1 3# 26# (0-15)#
CO Night 2 Ring Assignments: FF4 9# 1# (ExtPort)# (Trunk)# (0 or 1)#
Notes
Attendant Interactions. If the Primary Attendant is assigned delayed
ringing, the Attendant Overflow feature will be disabled. Also, if the Delayed
Ring function is enabled and no extensions are assigned or capable of ringing
(DND, unplugged, etc.), the ringing line will automatically ring the
Attendant.
Timing For Delayed Ringing. Delayed ring timing -- the period of time that
passes before the system transfers the unanswered call -- is controlled by the
CO Delayed Ring Timer (FF1 3# 26#).
DBS-2.3/9.2-400
FF4 9# 2# (1-73 or 1-145)# (1-64)# (0 or 1)#
Extension Port
DBS Manual - Revised April 2000
Chapter 4. Ringing and Hunt Groups (FF4)
0=Trunk does not ring.
Trunk Number
1=Trunk rings.
Page 4-29