Did/Dnis Flexible Ringing Assignments - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

DID/DNIS Flexible Ringing Assignments

Software Version: CPC-B Version 5.0 or higher
Address: for DID:
for DNIS:
Description
This address allows you to enable or disable ringing for specific DID/DNIS
numbers during Day, Night and Night 2 modes. This also applies to delayed
ringing.
Note: The DID/DNIS number must already be assigned to an extension
number before you can assign it for flexible ringing. See FF1 8# 3# (for
DID) and FF1 8# 4# 7# (for DNIS).
Programming
FF1 8# (5 or 6)#
Table 1-54. DID/DNIS Flexible Ring settings in different CPC-B versions
Related Programming
Delayed Ring: FF1 2# 1# 23# (0 or 1)#
DBS-2.3/9.2-400
FF1 8# 5# (DIDNo.)# (ExtNo.)# (0000[00]-1111[11])#
FF1 8# 6# (DNISNo.)# (ExtNo.)# (0000[00]-1111[11])#
(XXXX)# (10-69 or 100-699)# (0000[00]-1111[11])#
5=DID 4-digit DID or
6=DNIS DNIS number
(must already
be assigned to
an extension, or
the system won't
accept the number
here)
Ring Control
for each digit
setting
1st digit
2nd digit
3rd digit
4th digit
5th digit
6th digit
Default Setting:
DBS Manual - Revised April 2000
Chapter 1. System Programming (FF1)
Extension Number
that will receive
ringing
CPC-B
Version 5.0 to 6.1
Day ring
Night ring
Delayed Day ring
Delayed Night ring
[not available]
[not available]
1100
Ring Settings
(see table below)
0=Disabled
1=Enabled
Default: Ringing enabled;
Delayed ringing disabled.
CPC-B
Version 7.0 or higher
Day ring
Night ring
Night 2 ring
Delayed Day ring
Delayed Night ring
Delayed Night 2 ring
111000
Page 1-201