Chapter 1. System Programming (FF1)
Alert Tone for Voice Calls
Software Version: All Versions
Address: FF1 2# 1# 16# (0 or 1)#
Description
Use this address to determine whether voice intercom calls are preceded by
an initial alert ("splash") tone. By default, the alert tone is enabled.
The alert tone (if enabled) will be sounded for 0.5 seconds before the caller's
voice path is established.
Programming
Related Programming
Attendant Intercom Calling: FF1 2# 1# 14# (0 or 1)#
Extension Intercom Calling: FF1 2# 1# 15# (0 or 1)#
Page 1-22
FF1 2# 1# 16# (0 or 1)#
DBS Manual - Revised April 2000
Section 400-Programming
0=Alert tone is disabled.
1=Alert tone is enabled.
DBS-2.3/9.2-400