Table of Contents
Advertisement
Appendix F CPC-AII/B 9.1 Updates
CPC-AII/B Version 9.1 adds support for the "Call Record" feature available with
PanaVOICE™ Voice Mail systems. In addition, several quality improvements are
incorporated in Version 9.1.
CAUTION: When using the "Call Record" feature in some states it is
illegal to record telephone communications without the consent of all
parties. In other states, it is illegal to record without the consent of one
party. These laws do not make the Call Record feature on a telephone
system illegal. Before activating this feature, please check applicable
state and federal laws.
Call Record
Requires PanaVOICE equipped with Software Version 2.1 (Q32136) or later.
Description
Programming
Note: Call Recording may be restricted to selected ports on the voice mail
system. This may be done by creating a new "Call Recording" hunting group
consisting only of the extension numbers for the voice mail ports to be used
for call recording. Then program the Call Record key using this new hunt
group's pilot number. For instance, if you are using a 6-port voice mail and
want to restrict call recording to two of the ports in order to keep the other
four free for voice mail use, you may create an hunting group that consists
only of the two call recording ports and use its related pilot number for the
Call Record key assignments.
Operation
DBS-2.3/9.2-400
The call record feature allows a user to record a trunk conversation at the
press of preassigned Call Record FF key. The conversation is saved to the
user's voice mail box.
to assign a Call Record key...
FF5 (ExtPort)# (KeyNo.)# CONF PROG AUTO FF11
(Voice Mail Pilot No.) HOLD
See note below
To record a trunk call:
To record a trunk call, press the Call Record key. The LED flashes
while the connection to the Voice Mail recording port is being
established. This may take a few seconds. When recording begins, the
DBS Manual - Revised April 2000
Page F-1
Advertisement
Table of Contents
