Table of Contents
Advertisement
Chapter 1. System Programming (FF1)
Analog Transfer Ring Pattern
Software Version: CPC-A Only (Version 3.21 or higher)
Address: FF1 2# 1# 22# (0-6)#
Description
This address determines which ringing pattern is used for transferred calls to
devices connected to analog extension ports. By default, the ringing pattern
is .4 seconds on / 3.6 seconds off.
This setting is typically used to assign specific ringing patterns for calls
transferred to a modem, or for SLTs that require distinctive ringing for
transferred calls.
Programming
Notes
Analog Transfer Ring Pattern Setting for CPC-AII and CPC-B. The
Analog Transfer Ring Pattern for CPC-AII (all versions) and CPC-B (Version
2.11 or higher) is set in FF1 2# 1# 31#.
Page 1-28
FF1 2# 1# 22# (0-6)#
Setting (in seconds):
0= .4 on / 3.6 off
1= .8 on / .2 off / .8 on / .2 off / .8 on / .2 off / 1 off
2= .8 on / .2 off / .8 on / 2.2 off
3= .8 on / 2.2 off
4= .8 on / 3.2 off
5= .8 on / 5.2 off
6= .8 on / 3.2 off / .8 on / 7.2 off
DBS Manual - Revised April 2000
Section 400-Programming
DBS-2.3/9.2-400
Advertisement
Table of Contents
