Speed-Dial Enhancements - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

Speed-Dial Enhancements

Description
Programming
Assigning SSDs from programming mode:
DBS-2.3/9.2-400
The CPC-EX supports up to 500 SSD numbers (code range 000-499) for
each system, and up to 10 PSD numbers (code range 900-909) for each
extension.
With CPC-EX, you can chain up to 4 SSD codes together within a fifth
SSD number. You can also chain up to 4 SSD or PSD codes together
within a fifth PSD number. You can include both speed-dial codes and
regular dialed numbers into the same speed-dial number.
The maximum length of any speed-dial number is still 16 digits.
to assign a System Speed Dial number from programming mode...
FF10 1# (000-499)# (up to 16 digits)#
3-Digit SSD Code
000 thru 499 = range for CPC-EX
Version 1.0
EXAMPLE: To chain together SSD code 000 (C9-Pause), SSD code 001
(10288-Pause), and SSD code 002 (555-1212) within SSD code 003...
FF10 1# 000# C9 P #
FF10 1# 001# 10288 P #
FF10 1# 002# 5551212 #
FF10 1# 003# AUTO 000 AUTO 001 AUTO 002 #
EXAMPLE: To program SSD code 350 to access trunk group 81, then
pause, then dial 555-1212...
FF10 1# 350# C 1 P 5551212#
DBS Manual - Revised April 2000
Appendix C. EX 1.0 Feature Update
Valid Entries (using a DSS console):
0-9
(digits 0-9)
CONF (to clear data)
< or BS (to backspace)
>
(to forward-space)
P (to insert a pause)
(to access trunk group)
C
AUTO (to insert an SSD code)
Page C-25