Panasonic DBS-2.3-400 Programming Manual page 475

Section 400-Programming
Assigning PSDs from programming mode:
Assigning PSDs from a key telephone:
Notes
DBS-2.3/9.2-400
to assign a Personal Speed Dial number from programming mode...
FF10 2# (ExtPort)# (900-909)# (up to 16 digits)#
3-Digit PSD Code
EXAMPLE: To chain-dial SSD code 001 and PSD codes 901-902 together into
PSD code 909 on extension port 033...
FF10 2# 033# 909# AUTO 001 AUTO 901 AUTO 902#
EXAMPLE: To program PSD code 906 on extension port 033 to access pooled
trunk group 81, then pause, then dial 555-1212...
FF10 2# 033# 906# C 1 P 5551212#
to assign a Personal Speed Dial number from a key telephone...
1. Press ON/OFF.
2. Press PROG.
3. Press AUTO.
4. Enter the PSD code (90-99 or 900-909).
5. Enter the number to be dialed.
6. Press HOLD.
7. Press ON/OFF.
EXAMPLE: To chain together SSD code 000 (C9-Pause) and SSD code
002 (555-1212) within PSD code 900...
1. Press ON/OFF, PROG, AUTO.
2. Enter 900.
3. Press AUTO, 000, then AUTO, 002.
4. Press HOLD.
1) Chain-Dialing Limitations and Restrictions:
DBS Manual - Revised April 2000
Appendix C. EX 1.0 Feature Update
Valid Entries (using a DSS console):
0-9 (digits 0-9)
CONF (to clear data)
< or BS
(to backspace)
> (to forward-space)
P
(to insert a pause)
(to access trunk group)
C
AUTO
(to insert an SSD or
PSD code)
Page C-27