Door Opener Access Code - Panasonic DBS-2.3-400 Programming Manual

Chapter 1. System Programming (FF1)

Door Opener Access Code

Software Version: CPC-AII and CPC-B, Version 7.0 or higher
Address: FF1 2# 9# (DoorPhone)# 3# (0000-9999)#
Description
Use this address to establish a 4-digit door opener access code that can be
entered on any extension phone to unlock the door. This applies to door
phones connected to digital extension ports only (not trunk ports).
NOTE: To require the use of the access code to unlock the door, address
FF1 2# 1# 40# must be enabled.
Programming
Related Programming
Door Opener Access Code Required: FF1 2# 1# 40# (0 or 1)#
Door Phone Ring Assignments: FF1 2# 9# (1-4)# 2# (ExtPort)# (0 or 1)#
Door Opener Relay Timer: FF1 2# 9# (1-4)# 7# (0-5)#
Notes
Unlocking the Door With the Access Code. If Access Code NNNN is
established in this address, and "Door Opener Access Code Required" is
enabled, the extension user receiving the door phone call can press
#3 NNNN * (while still engaged in the call) to unlock the door. Or, from any
other extension not engaged in a door phone call, press ON/OFF #3 XXX
NNNN * (where "XXX" is the extension number assigned to the door phone
port).
Unlocking the Door Without the Access Code. If an access code is not
established (and its use is not required), extension users can still unlock the
door by pressing #3* (if engaged in a door phone call) -- or, ON/OFF #3
XXX * (from another extension).
Setting the Amount of Time the Door Will Remain Unlocked. Use the
"Door Opener Relay Timer" address (FF1 2# 9# 1-4# 7#) to set the number
of seconds the door will remain open after it is unlocked.
Page 1-88
FF1 2# 9# (1-4)# 3# (0000-9999)#
Door Phone Number
(1-4)
DBS Manual - Revised April 2000
Section 400-Programming
Door Opener Access Code
Default: 9999
DBS-2.3/9.2-400