Prime Line Pickup - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

Prime Line Pickup

Software Version: All Versions
Address: FF3 (ExtPort)# 11# (0 or 1)#
Description
Use this address to enable or disable the Prime Line Pickup feature, which
allows the user to automatically pick up a trunk assigned to the FF1 key by
simply picking up the receiver.
If the FF1 key is a pooled trunk key, an available trunk is accessed in
numerical order, from the highest trunk number assigned to the key to the
lowest.
Programming
Notes
Providing for Intercom Calling. If Prime Line Pickup is enabled, intercom
calls cannot be made from the extension unless an intercom call key is
assigned to another FF key.
DBS-2.3/9.2-400
FF3 (1-144)# 11# (0 or 1)#
Extension Port
DBS Manual - Revised April 2000
Chapter 3. Extension Programming (FF3)
0=Disable Prime Line Pickup.
1=Enable Prime Line Pickup.
Page 3-15