Trunk Mode - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

Trunk Mode

Software Version: CPC-B Version 4.0 or higher
Address: FF1 8# 4# 6# (Trunk)# 5# (0 or 1)#
Description
Determines whether T1 channels are used for only outgoing calls, or for both
incoming and outgoing calls.
Programming
Notes
Power-Cycling Requirement. For changes to this parameter to take effect,
the system must be turned off, then back on.
DBS-2.3/9.2-400
FF1 8# 4# 6# (1-64)# 5# (0 or 1)#
Trunk Number (1-64)
DBS Manual - Revised April 2000
Chapter 1. System Programming (FF1)
0=Incoming and Outgoing.
1=Outgoing only.
Page 1-193