Door Opener Relay Timer - Panasonic DBS-2.3-400 Programming Manual

Table of Contents

Advertisement

Chapter 1. System Programming (FF1)

Door Opener Relay Timer

Software Version: CPC-AII and CPC-B, Version 7.0 or higher
Address: FF1 2# 9# (DoorPhone)# 7# (0-5)#
Description
Use this address to determine the number of seconds a "buzzing" (unlocked)
door will remain unlocked for the visitor to enter the building (4 seconds by
default). This applies to door phones connected to digital extension ports
only (not trunk ports).
This Relay Timer begins immediately after an extension enters the
appropriate codes (#3*, #3 NNNN *, #3 XXX *, or #3 XXX NNNN *) to
unlock the door.
Programming
Related Programming
Door Opener Access Code Required: FF1 2# 1# 40# (0 or 1)#
Door Opener Access Code: FF1 2# 9# (1-4)# 3# (0000-9999)#
Page 1-92
FF1 2# 9# (1-4)# 7# (0-5)#
Door Phone Number
(1-4)
DBS Manual - Revised April 2000
Section 400-Programming
Number of Seconds Door Will Remain Open:
0=2 seconds
1=4 seconds (default)
2=6 seconds
3=8 seconds
4=10 seconds
5=12 seconds
DBS-2.3/9.2-400

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dbs-9.2-400

Table of Contents