Call Waiting/Ohva Text Reply - Panasonic DBS-2.3-400 Programming Manual

Chapter 6. Name and Message Assignments (FF6)

Call Waiting/OHVA Text Reply

Software Version: CPC-AII (all versions); CPC-B Version 2.0 or higher
Address: FF6 7# (1-5)# CONF (NNNNNNNNNNNNNNN)#
Description
When a busy party receives an indication of an incoming intercom call, the
busy party can respond by sending a text message back to the caller.
The text message can be sent after a Call Waiting tone, an Offhook Voice
Announce, or a Call Waiting tone followed by Offhook Voice Announce.
This address allows you to change the default messages. The following table
shows the default messages:
Table 6-2. Default call waiting/OHVA text reply messages
Call Waiting/OHVA text messages can also be assigned without entering the
programming mode, using the Attendant Feature option (see Section 700-
Feature Operation for instructions).
Programming
To assign call waiting/OHVA text reply messages ...
To clear call waiting/OHVA text reply messages ...
Page 6-10
Message
Number Message Definition
1 Take A Message
2 Please Hold
3 Will Call Back
4 Transfer
5 Unavailable
FF6 7# (1-5)# CONF (NNNNNNNNNNNNNNN)#
Message Number
FF6 7# (1-5)# CONF ON/OFF
DBS Manual - Revised April 2000
Message Text
(up to 15 characters)
Message Number
Section 400-Programming
DBS-2.3/9.2-400