Table of Contents
Advertisement
Section 400-Programming
Feature
Call Forward
Call Forward--All Calls
Call Forward--Busy/No Answer
Call Forward--Busy
Call Forward--No Answer
Call Park
Call Pickup
Call Waiting
Caller ID Log
Day Mode
Day/Night/Night2 Mode Toggle
(CPC-AII/B Version 7.0 or higher)
Dial Tone Off
DND (Do Not Disturb)
DP to DTMF Signal Conversion
DSS/BLF Key (internal calls)
Extension Directory
Extension Lockout
Group Call Pickup
Headset
Intercom Key
Internal Dial Tone
MCO or ML Keys
Meet-Me Answer
Message Waiting Answer
Mute
Night Mode
Night 2 mode
(CPC-AII/B Version 7.0 or higher)
DBS-2.3/9.2-400
Code to be assigned to soft key
(FF11 enters an asterisk *)
(FF12 enters a pound sign #)
72
Note: Beginning with CPC-AII/B Version
720
7.0, you can call-forward to an outside
721
phone number. Use an existing PSD or SSD
722
code as the destination phone number, with a
724
"CX-PhoneNo." format (where C is the
CONF key, and X is 1-6 or 9 for trunk group
81-86 or 89).
75
79
PROG PROG 3
FF11 6
FF12 521
FF12 520
Note: The FF key LED will be off during Day
mode; red during Night mode; and green during
Night 2 mode.
FF12 50
73
PROG PROG FF11 -or- PROG PROG FF12
PROG (10-69 or 100-699)
900002
74
70
FF12 51
FF12 8
FF12 50
(81-86 or 89)
Note: See "ML/MCO Separation" (FF3 ExtPort#
44#) to determine which type of key is available with
your software.
77
AUTO REDIAL
FF11 FF12
FF12 52
FF12 522 (
FF12 523
DBS Manual - Revised April 2000
Chapter 1. System Programming (FF1)
(CPC-AII/B versions prior to 7.0)
CPC-AII/B Version 7.0 or higher)
Page 1-77
Advertisement
Table of Contents
