Co Delayed Day Ring Assignments - Panasonic DBS-2.3-400 Programming Manual

Chapter 4. Ringing and Hunt Groups (FF4)

CO Delayed Day Ring Assignments

Software Version: CPC-AII (all versions); CPC-B Version 1.07 or higher
Address: FF4 5# (ExtPort)# (Trunk)# (0 or 1)#
Description
This program assigns delayed ringing to extensions for unanswered calls on
specific trunks during "Day" mode. Delayed ringing is when an unanswered
incoming call starts ringing at another extension after a certain period of time
(the first extension will stop ringing).
Programming
Related Programming
Delayed Ring: FF1 2# 1# 23# (0 or 1)#
CO Delayed Ring Timer: FF1 3# 26# (0-15)#
CO Day Ring Assignments: FF4 1# (ExtPort)# (Trunk)# (0 or 1)#
Notes
Attendant Interactions. If the Primary Attendant is assigned delayed
ringing, the Attendant Overflow feature will be disabled. Also, if the Delayed
Ring function is enabled and no extensions are assigned or capable of ringing
(DND, unplugged, etc.), the ringing line will automatically ring the
Attendant.
Timing For Delayed Ringing. Delayed ring timing -- the period of time that
passes before the system transfers the unanswered call -- depends on the CPC
version:
• CPC-AII (all versions); CPC-B Version 3.1 or higher: CO Delayed Ring
• CPC-B Versions prior to 3.1: Call Forward-No Answer Timer (FF1 3#
Page 4-20
FF4 5# (1-73 or 1-145)# (1-64)# (0 or 1)#
Extension Port
NOTE: Use port 73 (for single-
cabinet systems) or port 145 (for double-cabinet systems) to assign
ringing to an external paging or Universal Night Answer (UNA) device.
Timer (FF1 3# 26#).
19# 0-15#).
DBS Manual - Revised April 2000
Section 400-Programming
Trunk Number 0=Trunk does not ring.
1=Trunk rings.
DBS-2.3/9.2-400