Smdr Printing Mode 1: Outbound And Inbound; T1 Trunk Type - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming
Programming

SMDR Printing Mode 1: Outbound and Inbound

Description
Programming

T1 Trunk Type

Description
Programming
DBS-2.3/9.2-400
to specify the length of extension numbers...
FF1 2# 1# 12# (0-2)##
V1.0
SMDR data sent to Serial Port 1 can now include Network Calls also.
to specify the call type to be included in SMDR...
FF1 2# 2# 6# (0 - 2)#
V1.0
The setting for T1 Trunk Type now includes a parameter for E&M
Network.
DBS Manual - Revised April 2000
Appendix C. EX 1.0 Feature Update
0=2-digit numbering
1=3-digit numbering
2=4-digit numbering
0=Include outbound calls only
1=Include both inbound and outbound calls
2=Include inbound, outbound, and network calls
Note: An extra "#"
must be entered to
confirm the selection.
(or press "*" to cancel)
Page C-35