Yellow Alarm Detection - Panasonic DBS-2.3-400 Programming Manual

Chapter 1. System Programming (FF1)

Yellow Alarm Detection

Software Version: CPC-B Version 4.0 or higher
Address: Master Cabinet: FF1 8# 4# 4# 2# 2# (0-15)#
Slave Cabinet:
Description
Determines how long a yellow alarm signal must be on before the system
detects a yellow alarm. When a yellow alarm occurs, the "YEL" LED on the
T1 card lights. Also, if the Yellow Alarm Relay (FF1 8# 4# 4/5# 4# 1#) is
enabled, the alarm relay on the T1 MDF card closes.
Programming
Table 1-50. Yellow Alarm Detection timer values
Page 1-170
FF1 8# 4# 5# 2# 2# (0-15)#
FF1 8# 4# (4 or 5)# 2# 2# (0-15)#
4=Master Cabinet
5=Slave Cabinet
Setting
0 0 ms
1 50 ms
2 100 ms
3 150 ms
4 200 ms
5 250 ms
6 300 ms
7 350 ms
8 400 ms
9 450 ms
10 500 ms
11 550 ms
12 600 ms
13 650 ms
14 700 ms
15 750 ms
DBS Manual - Revised April 2000
Section 400-Programming
Yellow Alarm Detection timer setting
Default: 1 (50 ms) (see table below)
Value
DBS-2.3/9.2-400