Analog Adapter - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

Analog Adapter

44-Series phones only
CPC-AII/B Version 8.0, CPC-S/M Version 2.0, or CPC-EX Version 1.0 only
Description
Programming
DBS-2.3/9.2-400
The Analog Adapter (VB-44100) consists of a base adapter and PC board
which is installed on the underside of the phone. It is used to connect the
44-Series large-display phone to an analog device such as an SLT
telephone, cordless phone, FAX machine, or modem. This allows the same
phone line to be used to alternate between normal phone calls and analog
communications. (To install, see the instructions supplied with VB-44100).
to register the installation of the Analog Adapter on an extension...
FF3 (ExtPort)# 51# (0 or 1)#
Extension Port where
VB-44225 Large-Display
Phone is installed
to implement data security measures (interrupt tones, overrides)
for the Analog Port...
FF3 (ExtPort)# 52# (0 or 1)#
Extension Port where
VB-44225 Large-Display
Phone is installed
NOTE: This address will affect only the Analog Adapter, not the
Large-Display phone itself.
DBS Manual - Revised April 2000
Appendix D. CPC-AII/B 8.0 Feature Update
0=Analog Adapter is not
installed on this extension.
1=Analog Adapter is
installed on this extension.
0=Disable data security on the
Analog Adapter.
1=Enable data security on the
Analog Adapter.
Page D-13