Table of Contents
Advertisement
Section 400-Programming
Other Changes to Programming Addresses
Flexible Function Screen Soft-Key Assignments (FF1 2# 7# 25-39# (1-10)# (xxxxxxxx)#)
and FF Key Assignments have been modified to allow up to 8-digit entries.
Enhanced Programming Addresses
Enhanced programming addresses have been added to support T1 Networking. These
addresses are applicable only in a networked environment and can be ignored in a stand-
alone (non-networked DBS). Refer to the T1 Networking Reference Guide for detailed
information.
Modification to Toll Restriction Service
Description
DBS-2.3/9.2-400
to set individual extensions for forced LCR/NRS...
FF3 (1-144)# 4# (0/1)#
Extension Port
The program address for TRS Operator Access (FF7 1# 18#...) has been
modified to allow an extension to dial "0+NXX" phone numbers, even if
"0-only" dialing is denied.
Four settings are possible. See Table 4 for descriptions.
DBS Manual - Revised April 2000
Appendix C. EX 1.0 Feature Update
0=Disabled (no forced LCR/NRS)
1=Enabled (forced LCR/NRS)
Note: If not in a network (NRS is not enabled),
then only forced LCR is enabled.
Page C-37
Advertisement
Table of Contents
