General System Settings; Call Duration Display - Panasonic DBS-2.3-400 Programming Manual

Chapter 1. System Programming (FF1)

General System Settings

Call Duration Display

Software Version: All Versions
Address: FF1 2# 1# 1# (0 or 1)#
Description
This program determines whether call duration will be displayed on
telephones with LCDs. By default, call duration will display.
Programming
Related Programming
SMDR Display Start Timer for CO Calls: FF1 2# 1# 2# (0, 1 or 2)#
LCD Timer for Caller ID: FF1 2# 1# 38# (0, 1 or 2)#
Notes
No Interaction With SMDR Records. This setting does not affect SMDR
record generation.
Timing of Call Duration Display. In CPC-AII/B Version 6.1 or higher using
Caller ID, the LCD Timer for Caller ID address (FF1 2# 1# 38#) determines
the delay before call duration is displayed, so that Caller ID information can
appear first. In versions prior to 6.1, the SMDR Display Start Timer for
CO Calls (see next address) controls the delay.
Page 1-6
FF1 2# 1# 1# (0 or 1)#
0=Call duration is not displayed.
1=Call duration is displayed.
DBS Manual - Revised April 2000
Section 400-Programming
DBS-2.3/9.2-400