Unsupervised Conference - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

Unsupervised Conference

Software Version: All Versions
Address: FF3 (ExtPort)# 13# (0 or 1)#
Description
Use this address to enable or disable the Unsupervised Conference feature on
an extension. If enabled, the extension user can initiate a three-party
conference between two trunks and the extension, then drop out of the call by
pressing either of the trunk keys used to call the other parties.
Programming
Related Programming
Unsupervised Conference Timer: FF1 3# 9# (0-15)#
Unsupervised Trunk Conference: FF2 (Trunk)# 16#
Notes
Re-entering a Three-Party Conference. The user can re-enter the
conference by pressing either of the two CO trunk keys used to initiate the
conference.
Auto-Pause Interaction. If the DBS is behind a PBX, and an extension is
enabled for Unsupervised Conference, the Automatic Pause for PBX Line
address (FF2# Trunk# 13#) cannot be used.
DBS-2.3/9.2-400
FF3 (1-144)# 13# (0 or 1)#
Extension Port
DBS Manual - Revised April 2000
Chapter 3. Extension Programming (FF3)
0=The extension cannot initiate
a three-party conference.
1=The extension can initiate
a three-party conference.
Page 3-17