Id Code For System Programming - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

ID Code For System Programming

Software Version: All Versions
Address: FF1 7# (0000-9999)#
Description
This program assigns an ID code that can be dialed from a non-Attendant
phone to enter the programming mode (9999 by default).
Non-Attendant extensions enter the programming mode by dialing #98 and
then the ID Code entered in this address.
Programming
To assign the ID Code for system programming ...
To reset the ID Code to default "9999" ...
Notes
Entering the Programming Mode. Only one extension can be in
programming mode at a particular time.
DBS-2.3/9.2-400
FF1 7# (0000-9999)#
4-Digit ID Code for System Programming
FF1 7# CONF ON/OFF
DBS Manual - Revised April 2000
Chapter 1. System Programming (FF1)
(Default: 9999)
Page 1-133