Outpulse Delay Timer - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

Outpulse Delay Timer

Software Version: CPC-B Version 4.0 or higher
Address: FF1 8# 4# 2# 5# (0-8)#
Description
Determines how long the system waits before outpulsing dialed digits to the
network (500 ms by default).
Programming
Table 1-41. Outpulse Delay Timer values
DBS-2.3/9.2-400
FF1 8# 4# 2# 5# (0-8)#
Setting
0 100 ms
1 300 ms
2 500 ms
3 700 ms
4 1000 ms
5 1200 ms
6 1500 ms
7 1700 ms
8 2000 ms
DBS Manual - Revised April 2000
Chapter 1. System Programming (FF1)
Outpulse Delay Timer setting
Default: 2 (500 ms) (see table below)
Value
Page 1-151