Extension Transfer Recall Timer For Intercom Calls; Table 1-32 Extension Transfer Recall Timer Values For Intercom Calls - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

Extension Transfer Recall Timer for Intercom Calls

Software Version: CPC-AII (all versions) and CPC-B Version 2.0 or higher
Address: FF1 3# 25# (0-12)#
Description
This timer determines how long a transferred intercom call will ring at
another extension before it recalls back to the transferring extension (140
seconds by default).
Programming

Table 1-32 Extension Transfer Recall Timer values for intercom calls

Related Programming
Extension Transfer Recall Timer for CO Calls: FF1 3# 5# (0-12)#
Notes
Call Forward Interaction. If a call is transferred to an extension that has
Call Forwarding turned on, the call will follow the call forwarding path if the
Call Forward-No Answer Timer is less than the Recall Timer.
DBS-2.3/9.2-400
FF1 3# 25# (0-12)#
Extension Transfer Recall Timer setting for intercom calls
Default: 7 (140 seconds) (see table below)
Setting
0 No recall
1 20 seconds
2 40 seconds
3 60 seconds
4 80 seconds
5 100 seconds
6 120 seconds
7 140 seconds
8 160 seconds
9 180 seconds
10 200 seconds
11 220 seconds
12 240 seconds
DBS Manual - Revised April 2000
Chapter 1. System Programming (FF1)
Value
Page 1-119