Lcr Add Tables - Panasonic DBS-2.3-400 Programming Manual

Chapter 8. Least Cost Routing (FF8)

LCR Add Tables

Software Version: All Versions
Address: FF8 8# (TrunkGrp)# (AddDigits)#
Description
Use this address to assign Add Digits to calls routed to an LCR trunk group.
Up to 16 digits can be assigned.
When an outgoing call is routed to an LCR trunk group with Add Digits, the
DBS will add the digits to the beginning of the dialed number when it
outpulses the number to the CO.
This feature is often used to add CIC or PIC codes to dialed numbers. You
can also put "pauses" (by pressing REDIAL key) in the Add Digits.
The Add Digits feature is not associated with time-of-day or the dialed
number.
Programming
To create an LCR Add Table ...
To clear an LCR Add Table ...
Related Programming
Outbound DTMF Signal Duration for Auto-Dialed Digits: FF2 (Trunk)#
15# (1-3)#
LCR Trunk Groups: FF8 6# (TrunkGrp)# (Position)# (Trunk)#
Notes
Priority of Deleted Digits Over Added Digits. If digits are being added and
deleted from the same trunk group, the DBS will delete digits first, then add
digits.
Page 8-14
FF8 8# (1-8)# (NNNNNNNNNNNNNNNN)#
LCR Trunk Group
FF8 8# (1-8)# CONF ON/OFF
LCR Trunk Group
DBS Manual - Revised April 2000
Section 400-Programming
Addition Digits
(up to 16 digits)
DBS-2.3/9.2-400