Panasonic DBS-2.3-400 Programming Manual page 478

Appendix C. EX 1.0 Feature Update
Page C-30
to specify Parity Count for Serial Port 2 (if Parity Check is ON in the
above address)...
FF1 2# 2# 12# (0 or 1)#
to specify Baud Rate for Serial Port 2...
to specify Stop Bit Length for Serial Port 2...
to specify Data Length for Serial Port 2...
FF1 2# 2# 15# (3 or 4)#
DBS Manual - Revised April 2000
0=Odd parity count
1=Even parity count
FF1 2# 2# 13# (1-4)#
1=300 bits per second (bps)
2=1200 bps
3=4800 bps
4=9600 bps
FF1 2# 2# 14# (1-2)#
1=1 bit
2=2 bits
3=7 bits
4=8 bits
Section 400-Programming
DBS-2.3/9.2-400