Table of Contents
Advertisement
Section 400-Programming
To clear an Automatic Pause from a PBX Access Code ...
Programming Examples
Inserting a pause after PBX Access Code "9X" ...
To insert a pause after the PBX access code "9X" is dialed, enter this address
("X" represents the numbers 0-9):
This sequence will insert a pause between the "9X" and the rest of the dialed
digits. For example,
Inserting a pause after PBX Access Code "8" ...
To insert a pause after the PBX access code "8" is dialed, enter this address:
This sequence will insert a pause between the "8" and the rest of the dialed
digits. For example,
Related Programming
Automatic Pause Timer: FF1 3# 12# (0-15)#
Automatic Pause for PBX Line: FF2 (Trunk)# 13# (0 or 1)#
DBS-2.3/9.2-400
FF1 2# 3# (9-18)# CONF ON/OFF
First Digit of PBX Access Code
(see table, previous page)
FF1 2# 3# 17# 2#
91 + PAUSE + 404-555-5793
FF1 2# 3# 16# 1#
8 + PAUSE + 404-555-5793
DBS Manual - Revised April 2000
Chapter 1. System Programming (FF1)
Page 1-67
Advertisement
Table of Contents
