Attendant Hold Recall Timer For Intercom Calls; Table 1-29 Attendant Hold Recall Timer Values For Intercom Calls - Panasonic DBS-2.3-400 Programming Manual

Chapter 1. System Programming (FF1)

Attendant Hold Recall Timer for Intercom Calls

Software Version: CPC-AII (all versions) and CPC-B Version 2.0 or higher
Address: FF1 3# 22# (0-12)#
Description
This timer determines how long an intercom call will remain on hold at an
Attendant phone before it recalls (20 seconds by default).
Programming

Table 1-29 Attendant Hold Recall Timer values for intercom calls

Related Programming
Attendant Hold Recall Timer for CO Calls: FF1 3# 2# (0-12)#
Page 1-116
FF1 3# 22# (0-12)#
Attendant Hold Recall Timer setting for Intercom Calls
Default: 1 (20 seconds) (see table below)
Setting
0 No recall
1 20 seconds
2 40 seconds
3 60 seconds
4 80 seconds
5 100 seconds
6 120 seconds
7 140 seconds
8 160 seconds
9 180 seconds
10 200 seconds
11 220 seconds
12 240 seconds
DBS Manual - Revised April 2000
Section 400-Programming
Value
DBS-2.3/9.2-400