Chapter 1. System Programming (FF1)
Line Coding
Software Version: CPC-B Version 4.0 or higher
Address: Master Cabinet: FF1 8# 4# 4# 1# 4# (0 or 1)#
Slave Cabinet:
Description
Selects the line coding format used by the T1. Either "B8ZS" (binary 8-zeros
suppression) or "AMI" (Alternate Mark Inversion) can be selected. In most
cases (and by default), AMI is used.
Programming
Notes
Central Office Requirement. The framing format must match what is
ordered from the CO.
Power-Cycling Requirement. For changes to this parameter to take effect,
the system must be turned off, then back on.
Page 1-164
FF1 8# 4# 5# 1# 4# (0 or 1)#
FF1 8# 4# (4 or 5)# 1# 4# (0 or 1)#
4=Master Cabinet
5=Slave Cabinet
DBS Manual - Revised April 2000
Section 400-Programming
0=AMI (Alternate Mark Inversion)
1=B8ZS (binary 8-zeros suppression)
DBS-2.3/9.2-400