Panasonic DBS-2.3-400 Programming Manual page 115

Section 400-Programming
Related Programming
Extension Class of Service Assignment: FF3 (ExtPort)# 35#
Notes
Interaction with Extension Class of Service Assignment. By default, every
extension is assigned to Class of Service "0" (all 21 features are enabled). To
restrict feature usage on the extension, assign another Class of Service (1-8)
to it.
Caution When Changing A Class of Service Feature Setting. If you disable
a previously enabled feature for a Class of Service, make sure the feature is
not currently being used on the extension(s) assigned that Class of Service.
Otherwise, the extension user may not be able to deactivate the feature.
For example, if you reset Feature No. 3 to "0" (disabled) while an extension
has Background Music turned on, the extension user will not be able to turn it
off. (If this occurs, re-enable Feature No. 3 for the Class of Service, then turn
Background Music off at the extension -- then disable Feature No. 3 again.)
Call Forward--Outside (21) Feature Expansion. Beginning with CPC-AII
and CPC-B Version 7.0, any call (not just internal calls) can be call-
forwarded to an outside number.
DBS-2.3/9.2-400
12 Direct Pickup (79)
13 Group Pickup (70)
14 Tone/Voice Mode (1)
15 Message Waiting Set (2)
16 Busy Override (4)
17 Call Waiting (3)
18 Offhook Voice Announce (5)
19 Central Office Call Queuing (2)
20 SLT Transfer (8)
21 Call Forward--Outside (723)
Note: This item controls external call
forwarding for internal calls in CPC-B
Version 5.0 to 6.x (prior to 7.0).
DBS Manual - Revised April 2000
Chapter 1. System Programming (FF1)
Page 1-71