Co Delayed Night Ring Assignments - Panasonic DBS-2.3-400 Programming Manual

Chapter 4. Ringing and Hunt Groups (FF4)

CO Delayed Night Ring Assignments

Software Version: CPC-AII (all versions); CPC-B Version 2.0 or higher
Address: FF4 6# (ExtPort)# (Trunk)# (0 or 1)#
Description
This program assigns delayed ringing to extensions for unanswered calls on
specific trunks during "Night" mode. Delayed ringing is when an
unanswered incoming call starts ringing at another extension after a certain
period of time (the first extension will stop ringing).
Programming
Related Programming
Delayed Ring: FF1 2# 1# 23# (0 or 1)#
CO Delayed Ring Timer: FF1 3# 26# (0-15)#
CO Night Ring Assignments: FF4 2# (ExtPort)# (Trunk)# (0 or 1)#
Notes
Attendant Interactions. If the Primary Attendant is assigned delayed
ringing, the Attendant Overflow feature will be disabled. Also, if the Delayed
Ring function is enabled and no extensions are assigned or capable of ringing
(DND, unplugged, etc.), the ringing line will automatically ring the
Attendant.
Night Mode. Beginning with CPC-AII/B Version 7.0, there are two separate
Night modes -- "Night" and "Night 2". This address controls "Night"
delayed ring assignments (see FF4 9# 2# for "Night 2" delayed ringing).
Timing For Delayed Ringing. Delayed ring timing -- the period of time that
passes before the system transfers the unanswered call -- depends on the CPC
version:
• CPC-AII (all versions); CPC-B Version 3.1 or higher: CO Delayed
• CPC-B Versions prior to 3.1: Call Forward-No Answer Timer -- FF1 3#
Page 4-22
FF4 6# (1-73 or 1-145)# (1-64)# (0 or 1)#
Extension Port
NOTE: Use port 73 (for single-cabinet systems)
or port 145 (for double-cabinet systems) to assign ringing
to an external paging or Universal Night Answer (UNA) device.
Ring Timer -- FF1 3# 26# (0-15)#
19# (0-15)#
DBS Manual - Revised April 2000
Section 400-Programming
0=Trunk does not ring.
Trunk Number
1=Trunk rings.
DBS-2.3/9.2-400