Table of Contents
Advertisement
Section 400-Programming
Private Trunk Line
Software Version: All Versions
Address: FF2 (Trunk)# 12# (ExtPort)#
Description
Use this address to assign a private trunk line to an extension. A number of
private trunks can belong to one extension.
Once a private trunk is assigned to an extension, other extensions cannot
make outbound calls or receive inbound calls on that trunk (the system will
assign Toll Restriction Type 0 to the trunk on all other extensions). The
system will assign TRS Type 7 (no restrictions) to the private trunk assigned
to the extension.
Programming
To assign a Private Trunk Line(s) to an extension ...
To cancel Private Trunk assignment(s) for an extension ...
Related Programming
Day TRS Types 0-7 for Trunks: FF7 7# (ExtPort)# (Trunk)# (0-7)#
Night TRS Types 0-7 for Trunks: FF7 8# (ExtPort)# (Trunk)# (0-7)#
Notes
Reprogramming Toll Restrictions for Disabled Private Trunks. If a private
trunk setting is enabled and then later disabled, the system will not
automatically make that trunk available to other extensions. (TRS Type 0 will
apply to that trunk on all extensions.) Therefore, the trunk's TRS type must
be manually reprogrammed for each extension wishing to use that trunk
(using addresses FF7 7# and FF7 8#).
DBS-2.3/9.2-400
FF2 (1-64)# 12# (1-144)#
Trunk Number
FF2 (1-64)# 12# (1-144)# CONF ON/OFF
DBS Manual - Revised April 2000
Chapter 2. Trunk Programming (FF2)
Extension Port Number
Page 2-9
Advertisement
Table of Contents
